Water Cooler Sanitisation Information Covid-19 Click Here

CS - Halsey Taylor 4400BF - Endura II Tubular Outdoor Bottle Filling Station

  • Non-Refrigerated
  • GreenSpec Listed
  • BREEAM Approved
  • NSF 61/372 lead free
  • WRAS Approved
  • Outdoor Rated
  • Vandal Resistant

CS - Halsey Taylor 4400BF - Endura II Tubular Outdoor Bottle Filling Station

Buy £2,545.00 (RRP £3,403.00) | Rent from £13.44 / week

In Stock

The Endura II 4400BF pedestal bottle filling station which is WRAS Approved is available to buy or rent here at MIW.

Total = £2,545.00

The Endura II 4400BF pedestal bottle filling station, available to buy or rent here at MIW.co.uk, will fill up a standard 500ml water bottle in under seven seconds. With an easy to use push-button actuation mechanism and laminar flow, filling up a water bottle has never been quicker or more convenient. A heavy-gauge steel frame and E-coat immersion powdered finish make the 4400BF as sturdy as it is efficient, and protect the bottle filler from both vandals and the elements. This makes it ideal for outdoor use, and the anti-corrosion finish prevents any rust from contaminating the water supply or generally looking unpleasant. The Halsey Taylor Endura II 4400BF pedestal bottle filling station provides clean, hygienic water in accordance with the strict NSF/ANSI 61 regulations. These codes apply to all drinking fountains and water pipes, and Annex G ensures water is free from contaminants and with less than 0.25% lead content. This high level of cleanliness is achieved primarily due to an in-line strainer which sits in the 4400BF's water inlet. This traps particles of dirt of a tiny 0.14 millimetres or larger, preventing any stray dirt or other contaminants from entering the waterways and compromising the cleanliness of your fountain or drink.

Water is also protected from contamination by rust or corrosion with a powder-coat finish, applied through the process of E-coat immersion. By using electrical currents, an even coat of paint completely covers both the inside and outside of the bottle filling station. Further heating strengthens the bonds between the paint molecules, and prevents any paint or metal from rusting or flaking off into the waterways.

This E-coat immersion process not only contributes to the 4400BF bottle filling station's cleanliness, but also its outdoor practicality. The consistently thick coat of paint not only remains in top physical condition throughout the seasons, it is also durable enough to prevent rusting despite all that the British wet weather can throw at it. This makes the 4400BF one of the most suitable outdoor bottle filling stations on the market today.

The 4400BF's access panel is formed of heavy gauge steel, and attached with anti-vandal screws. These extra security measures prevent any unauthorised tampering from vandals or bored local youths, while also contributing to the physical sturdiness that makes the 4400BF stand out from many of its competitors. Access to the bottle filler's inner plumbing connections remains a painless task or you or any other authorised individuals, but stops all others in their tracks.

A simple push-button actuation system makes filling a bottle a simple, convenient task. The button is easily depressed, and will cut off water flow after being released, preventing any spillages or waste. The absence of a tap to potentially twist or snap also contributes to the 4400BF's suitability for outdoor use. All you get is a quick, convenient drink either indoors or out. At a rate of one gallon per minute, the 4400BF is also one of the fastest bottle filling stations on the market. Your bottle will be filled in no time, and with laminar flow technology, you'll avoid spillages even with the smallest of water bottles.

H x W x D (cm)162.6 x 25.4 x 25.4
Wall Security BracketsNo
Waste Option(s)32mm Standard Waste Required
Weight (kg)83
Chilled Water ProductionNil
Rated InputN/A
Water TemperatureAmbient