Buy £395.00 (£474.00 inc VAT) (RRP £1,975.00)
NOT SURE IF THIS IS RIGHT FOR YOU?
We have a limited number of these exceptional quality reconditioned units available.
The 8FS-1SS vandal proof stainless steel drinking fountain has been designed and built specifically for schools, colleges and universities; it is the only vandal proof water dispenser available in the UK to be fitted with an indestructible bottle filling & bubbler tap. The machine can provide vast quantities of chilled water on demand it also comes in an outdoor version.
To ensure maximum safety machines are installed using concealed bolts and reinforced security brackets making it impossible to move after fitting, it can easily cope with a high traffic area with standing knocks and bumps on a daily basis.
The bottle filling tap is made from chrome plated, high tensile steel and is virtually indestructible, it is operated by placing a bottle against the flow button which gives a steady accurate stream of water. The service free bubbler tap is operated using the panel buttons and moves away from the traditional bubbler style with a press button mechanism which require additional servicing, other features include an anti-squirt feature and two-stream supply which delivers twice the water than a standard bubbler tap helping to reduce queuing. The energy efficient compressor uses just 370w, yet produces 42 litres of chilled water per hour, one of the highest flow rates of chilled water for any water dispenser.
The high quality non corrosive, one piece stainless steel back plate is easy to clean and comes with a lifetime guarantee; it will also quickly drain unwanted spills due the deep draining well. It, the outer casing is manufactured from heavy-gauge stainless steel which is resistant to wear, moisture, perspiration, heat, and sunlight. All surfaces have been carefully contoured to ensure there are no sharp corners or edges capable of causing damage to clothes or cause physical harm.
The water feed pipe, trap, drain and electrical supply can be connected from within the 8FS-1SS avoiding unwanted attention from non-authorised service personnel, services can also be connected from the side or below the machine making for simple installation, as an additional security measure the 8FS-1SS is fitted with tamper proof screws ensuring you decide who gains access via the service panels.
|H x W x D (cm)||61.6 x 45.7 x 47.6|
|Wall Security Brackets||included, Included|
|Weight (kg)||29.65 Kg|
|Chilled Water Production||42 Litres per hour|
|Cooling System||Advanced Pressure Cooler|
|Rated Input||370 Watts|
|Water Temperature||6 - 10 Degrees C|