Buy £2,095.00 (RRP £3,256.00) | Rent from £12.95 / week
The EZH2O LK4405BF bottle filling station is WRAS Approved and ideal for outdoor installation, with a strong steel frame and a simple push-button activation unit to prevent damage from vandals.
NOT SURE IF THIS IS RIGHT FOR YOU?
The LK4405BF outdoor bottle filling station is WRAS Approved and ideal for outdoor installation, with a strong steel frame and a simple push-button activation unit to prevent damage from vandals. A textured powder-coat finish and rounded corners make the LK4405BF one of the best looking bottle filling stations on the market, and an E-Coat immersion also means the unit is almost completely resistant to corrosion both inside and out. A water flow rate of one gallon per minute, and Elkay's trademark in-line strainer, mean that this is the perfect product for quick, easy and clean drinking water. They're available to both rent and buy, right here at MIW.co.uk.
The LK4405BF wall mounted bottle filling station is perfect for outdoor application, with Elkay taking steps to ensure its strength and safety, whether in the park or the shopping centre. A thick steel structure ensures your bottle filler won't be dislodged by strong winds, and will leave local vandals with no more than a sore hand or foot, should the worst happen. The EZH2O LK4405BF is also designed with rounded corners, for an aesthetically pleasing look and extra safety in faster-paced environments like parks or sports facilities.
A push-button mechanism makes for easy activation of the unit, and also eliminates the possibility of a handle being snapped or twisted off. On top of this, the LK4405BF's access panel is cast from heavy duty steel, with anti-vandal screws. This provides easy access should you need to alter or replace any plumbing connections, yet impossible access for troublemakers.
The LK4405BF bottle filling station comes complete with a textured powder-coat finish, for a stylish yet protective outer coating. E-coat immersion also means extra protection from corrosion or the elements. The metal structure is coated with paint, and both are electrically charged. Depending on the voltage, this causes a complete covering of the metal both inside and out of a uniform thickness. Finally, the paint is heated to strengthen the molecular bonds and provide greater strength. And so, you're guaranteed complete paint coverage and little chance of any rust or contamination developing.
Further contamination protection is offered with an in-line strainer, which prevents any dust or dirt of 140 microns or larger from entering the waterway through the 3/8 inch inlet. This prevents any residual dirt build up inside the water bottle filler, and no dirt making its way into your drink. In accordance with the American NSF/ANSI 61 requirements, which deal with any equipment or substance used in the provision of drinking water, Halsey Taylor's bottle filler also filters lead and other contaminants from the water.
The LK4405BF bottle filling station will provide drinking water at approximately one gallon per minute, meaning it'll fill your standard 500ml drinks bottle in an impressive seven seconds. The LK4405BF is able to provide such quick speeds without the typical chugging or spitting which you'd expect from a home tap, by dispensing water in a smooth laminar flow. Not only does this improve filling times, it also reduces spillages and waste water.
The LK4405BF does not come with retaining bolts so these would need to be added and would be dependent on the surface the units were being mounted to. Consult the specification sheets for further details.
|H x W x D (cm)||46.2 x 25.4 x 48.6|
|Wall Security Brackets||Included|
|Waste Option(s)||Drain 32mm|
|Chilled Water Production||Nil|
Water Dispensers With A Drip Tray (Non-Draining)
Water Dispenser/s With A Fixed Drain
Outdoor Drinking Fountains
Counter Top Water Boilers
Wall mounted water boilers