Buy £679.00 (£814.80 inc VAT) (RRP £900.00)
In Stock
Rent from £5.95 / week
NOT SURE IF THIS IS RIGHT FOR YOU?
The SJ8-Q under sink chiller is manufactured from the highest quality rust resistant heavy gauge steel. Not only does this produce a stylish finish to the unit, it also guarantees durability over many years of use. As the casing is corrosion resistant, the unit is protected against potential structural deficiencies or contamination of the water supply. The unit measures 38cm x 26cm x 43cm, meaning it will fit comfortably underneath most sinks or cabinets.
The Halsey Taylor SJ8-Q uses R134A refrigerant, with efficient capillary sizing and a tube and tank style cooling system. These features, along with water passing through a continuous coil of copper tubing, ensure continual and efficient cooling. A built in thermostat allows water temperature to be set between 7 and 12 degrees Celsius, with up to 8 gallons of water being cooled per hour. Water is fed directly from the mains, through a ¼" inlet connection.
The SJ8-Q under sink chiller can be attached directly to a swan neck tap, like those available here at MIW Office Solutions. Alternatively, the SJ8-Q can provide chilled water for up to two drinking fountains, provided they are in close proximity (15 feet) of the unit. The unit requires an 120v electrical supply, attached through a 7/8" conduit connection, and uses 325 watts to run.
In the event of your unit requiring maintenance, the SJ8-Q under sink chiller features easily detachable panels for access to inner components. However, Halsey Taylor have taken steps to reduce the need for repairs or maintenance. The unit's internal fan motor is self-lubricating, reducing the need for repairs and promoting a longer product life. On top of this, the compressor is hermetically sealed with built-in overload protection.
The SJ8-Q under sink chiller is manufactured from the highest quality rust resistant heavy gauge steel. Not only does this produce a stylish finish to the unit, it also guarantees durability over many years of use. As the casing is corrosion resistant, the unit is protected against potential structural deficiencies or contamination of the water supply. The unit measures 38cm x 26cm x 43cm, meaning it will fit comfortably underneath most sinks or cabinets.
The Halsey Taylor SJ8-Q uses R134A refrigerant, with efficient capillary sizing and a tube and tank style cooling system. These features, along with water passing through a continuous coil of copper tubing, ensure continual and efficient cooling. A built in thermostat allows water temperature to be set between 7 and 12 degrees Celsius, with up to 8 gallons of water being cooled per hour. Water is fed directly from the mains, through a ¼" inlet connection.
The SJ8-Q under sink chiller can be attached directly to a swan neck tap, like those available here at MIW Office Solutions. Alternatively, the SJ8-Q can provide chilled water for up to two drinking fountains, provided they are in close proximity (15 feet) of the unit. The unit requires an 120v electrical supply, attached through a 7/8" conduit connection, and uses 325W to run.
In the event of your unit requiring maintenance, the SJ8-Q under sink chiller features easily detachable panels for access to inner components. However, Halsey Taylor have taken steps to reduce the need for repairs or maintenance. The unit's internal fan motor is self-lubricating, reducing the need for repairs and promoting a longer product life. On top of this, the compressor is hermetically sealed with built-in overload protection.
Filtration | Optional |
---|---|
H x W x D (cm) | 44.1 x 33.8 x 26.1 |
Wall Security Brackets | No |
Waste Option(s) | N/A |
Weight (kg) | 19.5 |
Chilled Water Production | 42 Litres per hour |
Cooling System | Advanced Pressure Cooler |
Rated Input | 300 Watts |
Water Temperature | 3 - 10 Degrees C |
Water Dispensers With A Drip Tray (Non-Draining)
Water Dispenser/s With A Fixed Drain
Outdoor Drinking Fountains
Counter Top Water Boilers
Wall mounted water boilers