• Refrigerated
  • NSF 61/372 lead free
  • WRAS Approved

Halsey Taylor SJ8-Q / Elkay ECH82 - Remote Chiller

Buy £679.00 (£814.80 inc VAT) (RRP £900.00)

In Stock

The SJ8-Q under sink chilled is WRAS Approved and manufactured by American industry leaders Halsey Taylor, whose units are esteemed for their high quality performance and impressive longevity.

Rent from £5.95 / week


Please call the sales line to order this product. +44 (0)1207 572 000
Total = £679.00

NOT SURE IF THIS IS RIGHT FOR YOU?

The SJ8-Q under sink chiller is manufactured from the highest quality rust resistant heavy gauge steel. Not only does this produce a stylish finish to the unit, it also guarantees durability over many years of use. As the casing is corrosion resistant, the unit is protected against potential structural deficiencies or contamination of the water supply. The unit measures 38cm x 26cm x 43cm, meaning it will fit comfortably underneath most sinks or cabinets.

The Halsey Taylor SJ8-Q uses R134A refrigerant, with efficient capillary sizing and a tube and tank style cooling system. These features, along with water passing through a continuous coil of copper tubing, ensure continual and efficient cooling. A built in thermostat allows water temperature to be set between 7 and 12 degrees Celsius, with up to 8 gallons of water being cooled per hour. Water is fed directly from the mains, through a ¼" inlet connection.

The SJ8-Q under sink chiller can be attached directly to a swan neck tap, like those available here at MIW Office Solutions. Alternatively, the SJ8-Q can provide chilled water for up to two drinking fountains, provided they are in close proximity (15 feet) of the unit. The unit requires an 120v electrical supply, attached through a 7/8" conduit connection, and uses 325 watts to run.

In the event of your unit requiring maintenance, the SJ8-Q under sink chiller features easily detachable panels for access to inner components. However, Halsey Taylor have taken steps to reduce the need for repairs or maintenance. The unit's internal fan motor is self-lubricating, reducing the need for repairs and promoting a longer product life. On top of this, the compressor is hermetically sealed with built-in overload protection.

The SJ8-Q under sink chiller is manufactured from the highest quality rust resistant heavy gauge steel. Not only does this produce a stylish finish to the unit, it also guarantees durability over many years of use. As the casing is corrosion resistant, the unit is protected against potential structural deficiencies or contamination of the water supply. The unit measures 38cm x 26cm x 43cm, meaning it will fit comfortably underneath most sinks or cabinets.

The Halsey Taylor SJ8-Q uses R134A refrigerant, with efficient capillary sizing and a tube and tank style cooling system. These features, along with water passing through a continuous coil of copper tubing, ensure continual and efficient cooling. A built in thermostat allows water temperature to be set between 7 and 12 degrees Celsius, with up to 8 gallons of water being cooled per hour. Water is fed directly from the mains, through a ¼" inlet connection.

The SJ8-Q under sink chiller can be attached directly to a swan neck tap, like those available here at MIW Office Solutions. Alternatively, the SJ8-Q can provide chilled water for up to two drinking fountains, provided they are in close proximity (15 feet) of the unit. The unit requires an 120v electrical supply, attached through a 7/8" conduit connection, and uses 325W to run.

In the event of your unit requiring maintenance, the SJ8-Q under sink chiller features easily detachable panels for access to inner components. However, Halsey Taylor have taken steps to reduce the need for repairs or maintenance. The unit's internal fan motor is self-lubricating, reducing the need for repairs and promoting a longer product life. On top of this, the compressor is hermetically sealed with built-in overload protection.

Filtration Optional
H x W x D (cm) 44.1 x 33.8 x 26.1
Wall Security Brackets No
Waste Option(s) N/A
Weight (kg) 19.5
Chilled Water Production 42 Litres per hour
Cooling System Advanced Pressure Cooler
Rated Input 300 Watts
Water Temperature 3 - 10 Degrees C
NULL

INCLUDED IN RENTAL

Water Dispensers With A Drip Tray (Non-Draining)

  • Free installation within two metres of a mains water supply
  • Sanitisation and servicing
  • Filters & consumables
  • Repairs including free replacement parts and labour
  • New machine upgrades
  • What is not covered – vandalism
  • Power: It is the responsibility of the hirer to provide an electrical socket within 0.5m of the unit
  • A full list of terms & conditions are available upon request

Water Dispenser/s With A Fixed Drain

  • Free site survey with a written quotation
  • Subsidised installation
  • Sanitisation and servicing
  • Filters & consumables
  • Replacement UV lamps
  • Repairs including free replacement parts and labour
  • New machine upgrades
  • What is not covered: vandalism
  • Power: It is the responsibility of the hirer to provide an electrical socket within 0.5m of the unit
  • A full list of terms & conditions are available upon request

Outdoor Drinking Fountains

  • Sanitisation and servicing
  • Filters & consumables
  • Repairs including free replacement parts and labour
  • New machine upgrades
  • What is not covered: vandalism
  • A full list of terms & conditions are available upon request
  • Installation is not included

Counter Top Water Boilers

  • Installation: Free within one metre of a mains water supply
  • Sanitisation and servicing
  • Repairs including free replacement parts and labour
  • New machine upgrades
  • What is not covered: Vandalism & consumables if required
  • Power: It is the responsibility of the hirer to provide an electrical socket within 0.5m of the unit
  • A full list of terms & conditions are available upon request

Wall mounted water boilers

  • Installation: £99 if within one metre of a mains water supply
  • Sanitisation and servicing
  • Repairs including free replacement parts and labour
  • New machine upgrades
  • What is not covered: Vandalism & consumables if required
  • Power: It is the responsibility of the hirer to provide a fused power spur within 0.5m of the unit
  • A full list of terms & conditions are available upon request